Multitech MultiVOIP 400, User Manual

Page: 7 / 88

7
Chapter 1 - Introduction and Description
Chapter 5 - Remote Configuration and Management
Chapter 5 provides procedures for changing the configuration of a remote MultiVOIP. Remote
configuration allows you to change the configuration of a unit by simply connecting two modems
between the two MultiVOIPs and remotely controlling the unit. Chapter 5 also describes typical client
applications (i.e., Telnet and Web-based management) used for remote configuration of the
MultiVOIP.
Chapter 6 - Warranty, Service and Tech Support
Chapter 6 provides instructions on getting service for your MultiVOIP at the factory, a statement of
the limited warranty, information about our Internet presence and user bulletin board service, and
space for recording information about your MultiVOIP prior to calling Multi-Tech’s Technical Support.
Appendixes
Appendix A - Transmission Control Protocol/Internet Protocol (TCP/IP) Description
Appendix B - Cabling Diagrams
Appendix C - Regulatory Information