Multitech MultiVOIP 400, User Manual

Page: 55 / 88

55
Chapter 5 - Remote Configuration and Management
Verify that the Communication Type is set for COM Port and the Select Port field is set for
the COM port of your local PC.
In the Dial String field, enter the AT command for dialing (ATDT) plus the phone number of
the remote MultiVOIP.
If your Modem Initialization String, Initialization Response, or Connect Response values are
different than the defaults in the dialog box, refer to your modem user documentation and
change the default values to match your modem.
Click OK when you are satisfied with your selections.
6 Run the MultiVOIP Configuration program. Click Start | Programs | MultiVOIP | MultiVOIP
Configuration, or double click on the MultiVOIP Configuration icon in the MultiVOIP
program group.
7 The Dialing dialog box is displayed while software is dialing the remote MultiVOIP.
8 The Reading Setup dialog box is displayed.
9 The MultiVOIP Setup menu is displayed. This is the dialog box of the remote MultiVOIP.
Refer to the online Help provided with your software for a description of each dialog box and
field within a dialog box.
10 After you have changed the configuration of the remote MultiVOIP, click Download Setup to
update the configuration. The remote MultiVOIP will be brought down, the new configuration
written to the unit, and the unit will reboot.
11 Click Exit when the downloading is complete.
12 The Hangup connection? dialog box is displayed
Click Yes to disconnect the phone connection to the remote site.
13 If the same telephone number is not going to be used again in the immediate future, you may
want to remove it from the Port Setup dialog box.
14 At the remote site, reconnect the MultiVOIP to the serial port of the PC and from the
MultiVOIP program group double click on the MultiVOIP Configuration icon to verify that the
MultiVOIP is running.