Multitech MultiVOIP 400, User Manual

Page: 31 / 88

31
Chapter 3 - Software Loading and Configuration
Phase 2: Configure Your Slave MultiVOIPs
The slave MultiVOIPs can be another MVP 400 or MVP 800 unit or a MultiVOIP-series.
If your slave MultiVOIP is an MVP 400 or MVP 800, perform the following software loading
procedure.
If your slave is a MultiVOIP-series, connect your command port cable and power up the unit
according to the cabling procedure in the MultiVOIP-series Quick Start. Then configure the unit as a
slave per the Installing Your MultiVOIP Software section in the MultiVOIP-series Quick Start.
If you are installing a MultiVOIP behind a firewall, you need to add the following UDP ports to your
firewall.
Q.931 Signaling, Ch1[900] Q.931 Signaling, Ch2 [902]
Q.931 Signaling, Ch3[904] Q.931 Signaling, Ch4 [906]
Q.931 Signaling, Ch5[908] Q.931 Signaling, Ch6 [910]
Q.931 Signaling, Ch7[912] Q.931 Signaling, Ch8 [914]
Status [5000]
Ch1 RTP [5004] Ch1 RTCP [5005]
Ch2 RTP[5006] Ch2 RTCP [5007]
Ch3 RTP[5008] Ch3 RTCP [5009]
Ch4 RTP[5010] Ch4 RTCP [5011]
Ch5 RTP[5012] Ch5 RTCP [5013]
Ch6 RTP[5014] Ch6 RTCP [5015]
Ch7 RTP[5016] Ch7 RTCP [5017]
Ch8 RTP[5018] Ch8 RTCP [5019]
Refer to your firewall user documentation to enter and open these ports.
1 Disconnect the pc from the command port of the Master MultiVOIP and connect it to the
command port on the Slave MultiVOIP.
2 Win 3.1 users - from the Program Manager, click the MultiVOIP Configuration icon in the
MultiVOIP Program Group. The main menu is displayed.
Win95/98/NT users - from your desktop, click Programs I MultiVOIP I MultiVOIP
Configuration. The main menu is displayed.