44
Model MT5600ZDXV
Command:
\V
n
Single Line Connect Message
Values:
n = 0 or 1
Default:
n/a
Description: \V0
Disables Single Line Connect Message.
\V1
Enables Single Line Connect Message, where the format
is: CONNECT, DTE speed>,Modulation></Protocol></
Compression></Line speed>.
*
Connect messages are contingent on X, W, and S95 command settings.
Command: + M S Select Modulation
Values:
Default:
n/a
Description: +MS= This extended-format command selects the modula-
tion, optionally enables or disables automode, and
optionally specifies the lowest and highest connection
rates using one to four subparameters (client modem)
or five subparameters (server modem).
T h e
command format is:
+MS=<mod>[,[<automode>][,[<min_rate>][,[<max_rate][,[<x_law][,[<rb_signalling>]]]]]]<cr>
The modem can send a string of information to the DTE
consisting of selected options when AT+MS?<cr> is
entered. The following table is a display of subparam-
eter definitions:
Table 3-1. Subparameter Definitions
