42
Model MT5600ZDXV
%C1
Enables MNP 5 Data Compression negotiation.
%C2
Enables V.42 bis Data Compression negotiation.
%C3
Enables both V.42 bis and MNP 5 Data Compression
negotiation.
Command: \ A
n
Select Maximum Block Size
Values:
n = 0, 1, 2, or 3
Default:
1
Description: \A0
64-characters MNP maximum block size.
\A1
128-characters MNP maximum block size.
\A2
192-characters MNP maximum block size.
\A3
256-characters MNP maximum block size.
*
The modem will operate an MNP error corrected link using a maximum
block size controlled by the parameter supplied.
Command: \ B
n
Transmit Break to Remote
Values:
n =\B1-\B9
Default:
\B3
Description: \B3
Break length in 100 ms units (non-error correction
mode).
In non-error correction mode, the modem will transmit
a break signal to the remote modem with a length in
multiples of 100 ms according to parameter specified.
The command works in conjunction with the
\K
command. In error correction mode, the modem will
signal a break through the active error correction
protocol, giving no indication of the length.
*
: When the modem receives a break from the remote modem, break is
passed to the DTE as follows: In non-error correction mode
direct, the break
length is passed; in non-error correction mode
normal and in error correction
mode, a 300 ms break is passed.
Command: \ K
n
Set Break Control
Values:
n = 0, 1, 2, 3, 4 or 5
Default:
5
Description:
Controls the response of the modem to a break received
from the DTE or the remote modem or the \B command
according to the parameter specified. The response is
different in three separate command states.
