51
Owner's Manual
from the DTE (escape code guard
time).
S 1 4
General Bit Mapped Options Status. Indicates the status of command
options:
Bit 0
This bit is ignored
Bit 1
Command Echo (En)
0 = Disabled (E0)
1 = Enabled (E1) Default
Bit 2
Quiet Mode (Qn)
0 = Send Result Codes (Q0) Default
1 = Do not Send Result Codes (Q1)
Bit 3
Result Codes (Vn)
0 = Numeric (V0)
1 = Verbose (V1) Default
Bit 4
Reserved
Bit 5
Tone (T) /Pulse(P)
0 = Tone (T) Default
1 = Pulse (P)
Bit 4
Reserved
Bit 7
Originate/Answer
0 = Answer
1 = Originate (Default)
Register Unit
Range
Default Description
S 1 6
General Bit Mapped Test Options Status. Indicates the Test in
progress status: Default 0.
Bit 0
Local Analog Loopback
0 = Disabled (Default)
1 = Enabled (&T1)
Bit 1
Not Used
Bit 2
Local Digital Loopback
0 = Disabled (Default)
1 = Enabled (&T3)
Bit 3
Remote Digital Loopback (RDL) status
0 = Modem not in RDL (Default)
1 = RDL in progress
Bit 4
RDL Requested (AT&T6)
0 = RDL not requested (Default)
1 =RDL requested (&T6)
Bit 5
RDL with self test
0 = Disabled (Default)
1 =Enabled (&T7)
Bit 7
Not used
