50
Model MT5600ZDXV
S0
rings
0, 1–255 1
Sets the number of rings before the
modem answers.
ATS0=0 disables
auto-answer completely.
S 1
rings
0–255
0
Counts the number of rings that
have occurred.
S 2
decimal
0–255
43 (+)
Sets ASCII code for the escape
character. Values greater than 127
disable the escape sequence.
S 3
decimal
0–127
13 (^M) Sets ASCII code for the carriage
return character.
S 4
decimal
0–127
10 (^J) Sets ASCII code for the line feed
character.
S 5
decimal
0–255
8 (^H)
Sets ASCII code for the backspace
character. Values greater than 32
disable the backspace character.
S 6
seconds
2–255
2
Sets the time the modem waits after
it goes off-hook before it begins to
dial the telephone number.
S 7
seconds
1–255
50
Sets the time the modem waits for
a carrier signal before aborting a
call. Also sets the wait for silence
time for the @ dial modifier.
S 8
seconds
0–255
2
Sets the length of a pause caused by
a comma character in a dialing
command.
S 9
1/10 sec 0–255
6 (0.6)
Sets the time, in tenths of a second,
that the carrier must be present
before the modem considers it valid
and turns on the RLSD.
S 1 0
1/10 sec 1–255
14 (1.4) Sets the time, in tenths of a second,
that a carrier signal must be lost
before the modem disconnects.
S 1 1
1 ms
50–255
95
Sets spacing and duration of dialing
tones.
Register Unit
Range
Default Description
S 1 2
1/50 sec 50–255
50 (1sec)
Defines the maximum period, in
fiftieths of second, allowed between
receipt of the last character of the
three escape character sequence
