60
Model MT5600ZDXV
S91
dBm
0 to -15dB -10 dB 10 Sets the transmit attenuation
level from 0 to 15 dBm for the PSTN
mode, resulting in a transmit level
from 0 to -15 dBm, In some coun-
tries, the transmit level may not be
changed and there are checks to
prevent transmit attenuation level
change.
-10 dBm is the transmit
level default.
S92
dBm
0 to -15dB -10 dB 10 Sets the transmit attenuation
level from 0 to 15 dBm for the FAX
mode, resulting in a transmit level
from 0 to -15 dBm. In some coun-
tries, the transmit level may not be
changed and there are checks to
prevent transmit attenuation level
change.
-10 dBm is the transmit
level default.
S95 - Extended Result Codes
The bits in this register can be set to override some of the Wn command
options. A bit set to a 1 in this register will enable the corresponding result
code regardless of the Wn setting. Also, refer to Table 3-4.
Default: 0
Bit 0
CONNECT result code indicates DCE speed instead of DTE
speed.
Bit 1
Append/ARQ to CONNECT XXXX result code in error-correction
mode (XXXX = rate; see Table 3-4).
Bit 2
Enable CARRIER XXXX result code (XXXX = rate; see
Table 3-4.
Bit 3
Enable PROTOCOL XXXX result code (XXXX = protocol
identifier; see Table 3-4).
Bit 4
Reserved.
Bit 5
Enable COMPRESSION result code (XXXX = compression
type; see Table 3-4).
Bit 6
Reserved.
Bit 7
Reserved.
