47
Owner's Manual
-K1 Enables V.42 LAPM to MNP 10 conversion.
-K2 LAPM answer mode detection phase.
Command: -Q
n
MNP 10 Enable Fallback to V.22 bis/V.22
Values:
n = 0 or 1
Default:
n/a
Description:
-Q0 n/a
-Q1 n/a
*
This command is included only for compatibility and performs no function.
Command: -SEC=n
Enable/Disable MNP10-EC
Values:
-SDR=n
Default:
n/a
Description:
-SEC=0 Disables MNP 10-EC
-SEC=1 Enables MNP 10-EC
*
-SEC=1,[<tx level>] where <tx level> is an optional transmit level
subparameter (transmit level range is 0 dBm to -30dBm and is specified by
a set S91 value).
Command: @M
n MNP 10 Initial Cellular Power Level Setting
Values:
n = 0-30
Default:
n/a
Description:
@M0n/a
,
,
,
@M30 n/a
*
This command is included only for compatibility and performs no function.
Command: :E
n
MNP 10 Compromise Equalizer Enable Command
Values:
n = 0 or 1
Default:
n/a
Description:
:E0 n/a
:E1 n/a
*
This command is included only for compatibility and performs no function.
Command: * B
View Numbers in Blacklist
Values:
n/a
Description:
This command requests the modem to return a list of
blacklisted numbers to the DTE. Permanently forbid-
den numbers as defined by country requirements will
