34
Model MT5600ZDXV
Command:
M
n
Monitor Speaker Mode
Values:
n = 0, 1, 2, or 3
Default:
1
Description: M0
Speaker always off.
M1
Speaker on until carrier signal detected.
M2
Speaker always on when modem is off-hook.
M3
Speaker on until carrier is detected, except while
dialing.
Command: N
n
Modulation Handshake
Values:
n = 0 or 1
Default:
1
Description: N0
Disables auto-mode (automatic modulation negotia-
tion); uses connection speed specified in S37. (Equiva-
lent to +MS <automode> subparameter to 0.)
N1
Enables auto-mode. (Equivalent to +MS <automode>
subparameter to 1.)
Command: O
n
Return Online to Data Mode
Values:
0 or 1
Default:
None
Description: O0
Enters on-line data mode without a retrain. Handling
is determined by the Call Establishment task. Typically,
if a connection is established, this command connects
the DTE back to the remote modem after an escape
( + + + ) .
O1
Issue a retrain and return to online data mode.
Command: Q
n
Enable/Disable Result Codes
Values:
n = 0 or 1
Default:
0
Description: Q0
Enable Result Codes.
Q1
Disable Result Codes.
Command: S
r = n Set Register Value
Values:
r = S-register number; n varies
Default:
None
Description:
Set value of register S
r to value of n, where n is entered
in decimal format.
Command: S
n
Read/Write Register Value
Values:
n, v, or ?
Default:
None
