12
Model MT5600ZDXV
In addition to the contents of the MT5600ZDXV package, you will need
the following equipment.
2.1.1 Computer
The MT5600ZDXV can be connected to any computer with an RS-232
serial port.
Note that your computer system should have a processor speed
of at least 75 MHz in order to take full advantage of the telephony features
of this product.
2.1.2 Serial Cable
You must provide a serial cable to connect the MT5600ZDXV to your computer.
Serial cables are available at computer stores and many office supply stores.
The cable must have a DB-25P connector at the modem end. For IBM and
compatible computers, the other end may have a DB-25P connector or a
DB-9S connector, depending on your particular computer and whether you are
using the COM1 or the COM2 serial port. The FCC requires cables to be shielded.
DB-25
DB-9
Figure 2-1. Serial Connectors
2.1.3 Telephone Line
You must have a telephone line with a conveniently located connector
(jack) to accept the cable that comes with the MT5600ZDXV. If you do not
have a telephone jack near your computer, you should install an extension
before proceeding.
In North America, telephone extension kits and accessories are available at
electronics stores and wherever telephones are sold. You may also hire an
independent contractor or your local telephone company to do the work.
If you want to add a line for your MT5600ZDXV fax modem, you must
contact your telephone company.
2.1.4 Safety Warnings
