52
Model MT5600ZDXV
S 1 8
decimal
0–255
0
Sets the length of time, in seconds,
that the modem conducts a test
(commanded by &Tn) before re-
turning to the command mode. If
this register value is zero, the test
will not automatically terminate;
the test must be terminated from
the command mode by issuing and
&T0 or H command. When S18 is
non-zero, the modem returns the
OK message upon test termination.
Register Unit
Range
Default Description
S 2 1
V.24/General Bit Mapped Options Status (Indicates the status of
command Options.) Default: 52 (34h)
Bit 0
Set by &Jn command but ignored otherwise.
0 = &J0 (Default)
1 = &J1
Bit 1
Reserved
Bit 2
CTS behavior (&Rn)
0 = CTS tracks (&R0)
1 = CTS always on (&R1)--Default
Bit 3-4
DTR behavior (&Dn)
0 = &D0 selected
1 = &D1 selected
2 = &D2 selected (Default)
3 = &D3 selected
Bit 5
RLSD (DCD) behavior (&Cn)
0 = &C0 selected
1 = &C1 selected (Default)
Bit 6 DSR behavior(&Sn)
0 = &S0 selected (Default)
1 =&S1 selected
Bit 7 Long Space Disconnect (&Y0)
0 = Y0 selected (Default)
1 =Y1 selected
Register Unit
Range
Default Description
S 2 2
Speaker/Results Bit Mapped Options Status (Indicates the status of
command Options.) Default: 117 (75h)
Bit 0-1
Speaker volume (Ln)
0 = Off (L0)
1 = Low (L1)
2 = Medium (L2)
3 = High (L3)
