![background image](http://html1.mh-extra.com/html/multiquip/dis185ssi4f/dis185ssi4f_installation-instructions-manual_1854954014.webp)
DIS185SSI4F AIR COMPRESSOR — HOSE REEL INSTALLATION INSTRUCTIONS P/N EE60468 — REV. #0 (04/16/18) — PAGE 14
HOSE INSTALLATION
1. Place 1/2" thread sealant tape onto the straight fitting
on the hose (P/N 59265). See Figure 32.
Figure 32. Connect Hose to Reel
2.
On the fuel tank side of the air compressor
, connect
the straight fitting on the hose (P/N 59265) to the
swivel fitting on the hose reel (P/N 59263), and tighten
securely. See Figure 32.
3. Loop one end of the safety cable (P/N 59274) onto the
right air output valve at the rear of the air compressor.
See Figure 33.
Figure 33. Connect Hose to Output Valve
SWIVEL
FITTING
HOSE REEL
P/N 59263
FUEL TANK
SIDE
PLACE 1/2" THREAD
SEALANT TAPE
ON STRAIGHT FITTING
HOSE
P/N 59265
SAFETY CABLE
P/N 59274
HOSE
P/N 59265
90º FITTING
RIGHT AIR
OUTPUT VALVE
4. Loop the other end of the safety cable (P/N 59274)
onto the 90-degree fitting end of the hose (P/N 59265).
See Figure 33.
5. Connect the 90-degree fitting on the hose (P/N 59265)
to the right air output valve at the rear of the air
compressor. See Figure 33.
6. If installing the dual hose reel kit (P/N MQPDUALREEL50),
repeat steps #1–5 on the battery side of the unit.
JACK INSTALLATION
Secure the jack (P/N 29479) to the bumper (P/N 59269)
with the included lock nut and spacer. See Figure 34.
Figure 34. Jack Installation
BUMPER
P/N 59269
JACK
P/N 29479
LOCK NUT
SPACER