DIS185SSI4F AIR COMPRESSOR — HOSE REEL INSTALLATION INSTRUCTIONS P/N EE60468 — REV. #0 (04/16/18) — PAGE 8
1. Secure the pivot base plate (P/N 59234) to the end of
the bumper (P/N 59269) with four 3/8-16 × 1-1/4" hex
flange bolts (P/N 1023) and four 3/8"-16 hex flange
nuts (P/N 21781). See Figure 14.
Figure 14. Pivot Base Plate Installation
2. Using the pivot base plate (P/N 59234) as a guide, drill
two 13/32-inch holes into the fender. See Figure 15.
Figure 15. Drill Pivot Base Plate Holes
3. Insert two 3/8-16 × 1-1/4" hex flange bolts (P/N 1023)
through the new holes in the fender with two 3/8"-16
hex flange nuts (P/N 21781), and tighten securely.
See Figure 16.
PIVOT BASE
PLATE
P/N 59234
BUMPER
P/N 59269
3/8-16 × 1-1/4"
HEX FLANGE BOLT
P/N 1023
3/8"-16
HEX FLANGE NUT
P/N 21781
PIVOT BASE
PLATE
P/N 59234
DRILL TWO
13/32" HOLES
FENDER
Figure 16. Secure Pivot Base Plate to Fender
4. Secure the right pivot base (P/N 59272) to the pivot
base plate (P/N 59234) with two 3/8-16 × 1-1/4" hex
flange bolts (P/N 1023) and two 3/8"-16 hex flange
nuts (P/N 21781). Place pivot plate shims (P/N 59286)
between the pivot base plate and pivot base as needed
to keep the top of the base level with the top of the
fender. See Figure 17.
Figure 17. Pivot Base Installation
PIVOT BASE
PLATE
P/N 59234
FENDER
3/8-16 × 1-1/4"
HEX FLANGE BOLT
P/N 1023
3/8"-16
HEX FLANGE NUT
P/N 21781
RIGHT
PIVOT BASE
P/N 59272
PIVOT BASE
PLATE
P/N 59234
SHIM
P/N 59286
3/8"-16 HEX
FLANGE NUT
P/N 21781
3/8-16 × 1-1/4"
HEX FLANGE BOLT
P/N 1023
