DIS185SSI4F AIR COMPRESSOR — HOSE REEL INSTALLATION INSTRUCTIONS P/N EE60468 — REV. #0 (04/16/18) — PAGE 11
2. Secure the right reel mount (P/N 59275) to the
pivot base (P/N 59272) with the slotted hex nut
(P/N EM968481) and 3/16 × 2" cotter pin (P/N 38709)
as shown in Figure 24. Bend the cotter pin tines to
lock it in place.
Figure 24. Secure Reel Mount to Pivot Base
3. Place the reel mount lock latch (P/N 59251) onto the
fender 9/16-inch from the end of the right reel mount
(P/N 59275). Align the pin in the center of the reel
mount lock latch with the hole in the reel mount. See
Figure 25.
RIGHT REEL
MOUNT
P/N 59275
PIVOT BASE
P/N 59272
SLOTTED
HEX NUT
P/N EM968481
COTTER PIN
P/N 38709
Figure 25. Drill Reel Mount Lock Latch Holes
4. Make sure the reel mount (P/N 59275) swings out freely
without hitting the reel mount lock latch (P/N 59251),
then mark the two lock latch hole positions on the right
fender with a scriber or equivalent tool. See Figure 25.
5. Drill two 11/32-inch holes into the top of the fender
(Figure 25).
RIGHT
REEL MOUNT
P/N 59275
9/16"
REEL MOUNT
LOCK LATCH
P/N 59251
FENDER
MARK AND DRILL
TWO 11/32" HOLES
ALIGN PIN
WITH HOLE
IN REEL
MOUNT