manualshive.com logo in svg

Multicam Plasma 1000 V Series, User Manual

The Multicam Plasma 1000 V Series is a cutting-edge machinery engineered for precision in metal fabrication. Enhance your productivity by accessing the comprehensive User Manual, available for free download at manualshive.com. Discover seamless operation and unlock the full potential of this innovative product with step-by-step instructions and valuable insights.

Share
Download
background image

 

Innovation. Quality. Performance. Best in Industry. Worldwide.

 

 

Original Instructions 

 
(a) The business name and full address of the manufacturer and of the authorized representative is as follows: 
 
MultiCam Inc 
1025 W Royal Ln 
DFW Airport TX 75261 
 
Erik Ketele 
Ketele NV 
Mechelsesteenweg, 1-3 
2540 Hove 
BELGIUM 
 
(b) The machinery is designated as Plasma 1000/3000/6000/V Series. 
 
(c) The EC declaration of conformity is attached. 
 
(d) The above CNC machine is designed to modify raw materials that can be used in manufacturing. 
 
(e) The maintenance and repair information is attached. 
 
(f) The workstation likely to be occupied by the operator is a warehouse-like area with high ceilings and heavy 
flooring and approximately 36” (914.4mm) between the edges of the machine and any auxiliary units appropriate 
in a warehouse-like area. 
 
(g) The machinery will be used to modify raw materials that can be used in manufacturing. 
 
(h) WARNING: The CNC machine should not be used as a table or desk, heater, ladder, washing station, or prank 
item as the machine has the ability to crush body parts and materials and can cause serious bodily damage up to 
and including possible death. 
 
(i) The assembly, installation, and connection information is attached. 
 
(j) The information relating to reducing noise and vibration is attached. 
 
(k) The technician performing the installation will follow an installation checklist as well as an instruction 
checklist for training operators. This information is attached. 
 
(l) The residual risks inherent in the CNC machine are operator-specific and can include cuts, scratches, burns, 
amputations, and death resulting from non-adherence to the warning labels placed on the machine and operator-
specific association and experience working with CNC machinery. 
 
(m) The protective measures to be adopted by the user include clothing that is not loose or long; minimal to no 
jewelry and no long-hanging accessories or wardrobe-specific materials; protective eye wear and ear wear; long 
hair restrained; gloves or comparable hand-covering when handling sharp or hot parts; avoidance of alcohol, 
drugs, or any other substance that may decrease judgment or alertness; adherence to warning labels placed on the 
machine as well as operator-specific association and experience working with CNC machinery; avoidance of 

Routers * Lasers * Plasma * WaterJets * Knife Cutters  

                                                                                                                        www.MultiCam.com                        

 

Summary of Contents for Plasma 1000 V Series




































































































































































































































Reviews:

No comments

Related manuals for Plasma 1000 V Series

YABE 110T Operating Instructions Manual preview
110T
Brand: YABE Pages: 52
Textron Klauke SDK20 Instruction Manual preview
Klauke SDK20
Brand: Textron Pages: 14
Mitox 26L Operator'S Manual preview
26L
Brand: Mitox Pages: 64
Zenoah BKZ305L-EZ Owner'S Manual preview
BKZ305L-EZ
Brand: Zenoah Pages: 24
Belle Group HDC 350 Operator'S Manual preview
HDC 350
Brand: Belle Group Pages: 32
MBM BC-10 Operation Manual preview
BC-10
Brand: MBM Pages: 27
Land Pride RC5014 Operator'S Manual preview
RC5014
Brand: Land Pride Pages: 44
Omcan FP-CN-0178 Instruction Manual preview
FP-CN-0178
Brand: Omcan Pages: 16
Land Pride Rotary Cutter RCR2684 Operator'S Manual preview
Rotary Cutter RCR2684
Brand: Land Pride Pages: 54
Raider RDP-ETC26T User Manual preview
RDP-ETC26T
Brand: Raider Pages: 76
Habasit AF-61/6 30 Series Operating Instructions Manual preview
AF-61/6 30 Series
Brand: Habasit Pages: 14
NUTOOL NES500 Original Operating Instruction preview
NES500
Brand: NUTOOL Pages: 22
Abicor Binzel ABICUT 25K Operating Instructions Manual preview
ABICUT 25K
Brand: Abicor Binzel Pages: 64
Sawyer Excalibur Series Manual preview
Excalibur Series
Brand: Sawyer Pages: 6
MA CE001G Instruction Manual preview
CE001G
Brand: MA Pages: 92
Laguna Tools Smartshop II Manual preview
Smartshop II
Brand: Laguna Tools Pages: 51
Garde 181FC12 User Manual preview
181FC12
Brand: Garde Pages: 4
Echo SRM-210 - 01-04 Operator'S Manual preview
SRM-210 - 01-04
Brand: Echo Pages: 32

Brands by name

Popular brands

Load more brands