manualshive.com logo in svg

Multicam Plasma 1000 V Series, User Manual, Page: 155 / 227

Share
Download
Multicam Plasma 1000 V Series User Manual Download Page 155

 

MI 

 

89

 

Innovation. Quality. Performance. Best in Industry. Worldwide.

 

 

Knife Up Delay 

The Knife Up Delay function allows the operator to include a pause before the knife is raised. This prevents any 
incidental cutting by the knife before the blade has exited the material. 
 

1. Press 

Menu

 

 

to access the menu system. 

 

 

2. Press 

X-axis Jog Arrows 

 until Knife is highlighted in blue. 

 

 

3. Press 

Enter 

 

to access the Knife sub-menu.

 

4. Press 

X-axis Jog Arrows 

 until Knife Up Dly is highlighted in blue. 

5. Press 

Enter 

 to set the Knife Up Delay.  

      

6. Enter the value (e.g., 1000msec) and press 

Enter 

. The value will be displayed on the Knife sub-menu.       

    

 

 

 

 

 

 

 

 

 

 

 

 

Knife

   

Menu

 

 
 
 
 
 
 
 
 
 
 
 
 
 
 
 
 

Routers * Lasers * Plasma * Water Jets * Knife Cutters  

                                                                                                                        www.MultiCam.com                        v. 03 13

 

Summary of Contents for Plasma 1000 V Series




































































































































































































































Reviews:

No comments