MI
49
Innovation. Quality. Performance. Best in Industry. Worldwide.
Material Cutoff
The Material Cutoff function allows the operator to manually cut off the remainder of the material based on X and
Y input. This function does not work from a Soft Home but starts at the current Jog location and ends when the
operator stops the motion.
1. Set up the system as if a normal file is to be executed (e.g., Material Library, Cut Height, Lift Height, Pierce
Height, and X & Y Feedrate). It is not necessary to set home as the cut will begin at the current X,Y location
of the head assembly.
2. Press
Jog Arrows
to position the head assembly in the desired start position.
3. Press
Menu
to access the menu system.
4. Press
X-axis Jog Arrows
until Cut Utilities is highlighted in blue.
5. Press
Enter
to access the Cut Utilities sub-menu
.
6. Press
X-axis Jog Arrows
until Material Cutoff is highlighted in blue.
7. Press
Enter
to access the Material Cutoff function.
8. Enter the desired tool number if different from the one currently loaded.
9. Enter the desired value for the X Cutoff Distance using the number keypad (e.g., 0).
10. Press
Enter
to accept the value.
Routers * Lasers * Plasma * Water Jets * Knife Cutters
www.MultiCam.com v. 03 13
