SW
8
Innovation. Quality. Performance. Best in Industry. Worldwide.
* Determine where Clip Toolpaths to Plate is necessary since it allows the operator to output only the toolpath
groups that are on the plate. This is useful when creating jobs that are too big for one sheet of material but
should be kept together. An out-of-bounds message can occur when the operator is running a file as a closed
contour, though parts of the file are not cutting, because either the toolpath option is checked or the toolpath
is hanging off the plate.
Initialization
* Select both Maximize Application and Maximize Document to open the program and any files at maximum
window size.
* Reserve the Display 4 Views option until toolpaths are in place and a particular view should be seen
normally. Display 4 Views will show the top, front, side, and perspective view when opening, importing, or
starting a new file.
* Select Prompt for Plate so that the system will prompt at the start of a file to define a plate or material size.
A plate does not have to be defined and can be handled when nesting objects or running the 3D simulation.
The Clip to Plate option should be unchecked when not defining a plate.
* Adjust the Small Size Threshold to indicate to EnRoute what the operator will consider a small size (e.g.,
0.0775). The Medium Size Threshold should be left at the default settings.
Routers * Lasers * Plasma * Water Jets * Knife Cutters
www.MultiCam.com v. 03 13