Multicam Plasma 1000 V Series User Manual Download Page 199

Page: 199 / 227

Innovation. Quality. Performance. Best in Industry. Worldwide.

Software

The

MultiCam

Plasma system can use files created from many popular software packages in the industry, such

as AlphaCam and EnRoute, as well as files created in G Code and HPGL. The productivity suite enhances
communication between the

MultiCam

Plasma system and the host computer.

Software

AlphaCam Post Processor Installation

MultiCam

offers 2 AlphaCam post processor systems for use depending on the type of post system in the

machine. The

MultiCam

ATC-ARP post processor interfaces with both ATC and multiple head units while the

MultiCam

ARP post processor interfaces with single head units and outputs a manual tool change command so

that multiple tool change files can be run on single head units.

Multiple Post Units

1. Copy the appropriate post processor located in Software Drivers/AlphaCam from the

MultiCam

Installation

CD into the LICOMDAT/RPOSTS.ALP directory using Windows Explorer.

2. Start the Alpha Edit program from the AlphaCam folder in the Windows Start menu once the post processor is
copied.

3. Select Set Default Post/Plasma from the file menu in Alpha Edit.

Routers * Lasers * Plasma * Water Jets * Knife Cutters

www.MultiCam.com v. 03 13

Summary of Contents for Plasma 1000 V Series




































































































































































































































Search results

Summary of Contents for Plasma 1000 V Series

Reviews:

Related manuals for Plasma 1000 V Series

Brands by name

Popular brands

Multicam Plasma 1000 V Series, User Manual

Search results

Summary of Contents for Plasma 1000 V Series

Reviews:

Related manuals for Plasma 1000 V Series

Brands by name

Popular brands