MI
51
Innovation. Quality. Performance. Best in Industry. Worldwide.
Circle
The Circle function executes any size circle shape. Home is at the center, and the cutting head moves out the
length of the radius to complete the cut. Operators should verify that there is enough material to complete the
circle before beginning the file.
1. Set up the system as if a normal file is to be executed (e.g., Material Library, Set Home, Cut Height, Lift
Height, Pierce Height, and X & Y Feedrate).
2. Press
Menu
to access the menu system.
3. Press
X-axis Jog Arrows
until Cut Utilities is highlighted in blue.
4. Press
Enter
to access the Cut Utilities sub-menu
.
5. Press
X-axis Jog Arrows
until Circle is highlighted in blue.
6. Press
Enter
to access the Circle function
.
7. Enter the radius of the Circle using the number keypad (e.g., 0.50).
8. Press
Enter
to accept the value.
9. Press
Start
to execute Circle Cut,
Cancel
to abort the function, or
Pause
to reposition the
start point.
Routers * Lasers * Plasma * Water Jets * Knife Cutters
www.MultiCam.com v. 03 13