manualshive.com logo in svg

MTU MS150033/05E, Operating Instructions Manual

Share
Download
MTU MS150033/05E Operating Instructions Manual Download Page 74

112923 – MD/SD T-Exhaust

Red alarm. Initiated by EMU.

Cause

Corrective action

Combined alarm (for details,
refer to the source alarm).

u

Combined alarm (for details, refer to the source alarm).

150176 – Lube Oil Min

Red alarm. Initiated by SAM.

Cause

Corrective action

Minimum engine oil level
detected.

1. Check engine oil level (→ Page 162).
2. Check replenishment system (→ Page 162).

150178 – Lube Oil Max

Red alarm. Initiated by SAM.

Cause

Corrective action

Maximum engine oil level
detected.

1. Check engine oil level (→ Page 162).
2. Check replenishment system (→ Page 162).

150200 – Communication Lost ECU

Red alarm. Initiated by SAM.

Cause

Corrective action

No communication with ECU
CAN.

1. Check supply voltage.
2. Check connecting line.

150201 – Communication Lost EMU

Red alarm. Initiated by SAM.

Cause

Corrective action

No communication with EMU
CAN.

1. Check supply voltage.
2. Check connecting line.

150202 – Comm. Lost Knock Module

Red alarm. Initiated by SAM.

Cause

Corrective action

No communication with
knocking module CAN.

1. Check supply voltage.
2. Check connecting line.

150203 – Comm. Lost Ignition

Red alarm. Initiated by SAM.

Cause

Corrective action

No communication with ignition
CAN.

1. Check supply voltage.
2. Check connecting line.

74 | Troubleshooting | MS150033/05E 2013-10

TIM-ID: 0000017543 - 001

Summary of Contents for MS150033/05E






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands