manualshive.com logo in svg

MTU MS150033/05E, Operating Instructions Manual

Share
Download
MTU MS150033/05E Operating Instructions Manual Download Page 73

112715 – HIHI T-Exhaust B5 (abs)

Red alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112716 – HIHI T-Exhaust B6 (abs)

Red alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112717 – HIHI T-Exhaust B7 (abs)

Red alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112718 – HIHI T-Exhaust B8 (abs)

Red alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112719 – HIHI T-Exhaust B9 (abs)

Red alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112720 – HIHI T-Exhaust B10 (abs)

Red alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

MS150033/05E 2013-10

| Troubleshooting | 73

TIM-ID: 0000017543 - 001

Summary of Contents for MS150033/05E






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands