manualshive.com logo in svg

MTU MS150033/05E, Operating Instructions Manual

Share
Download
MTU MS150033/05E Operating Instructions Manual Download Page 56

5.2 SAM – Fault messages

112222 – HI T-Exhaust Mean

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The average value of all
individual cylinder exhaust
temperatures is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112223 – HIHI T-Exhaust Mean

Red alarm. Initiated by EMU.

Cause

Corrective action

The average value of all
individual cylinder exhaust
temperatures is too high.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112301 – HI T-Exhaust A1

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112302 – HI T-Exhaust A2

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112303 – HI T-Exhaust A3

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

112304 – HI T-Exhaust A4

Yellow alarm. Initiated by EMU.

Cause

Corrective action

The exhaust temperature of this
cylinder is too high as compared
with the average value.

1. Check emission values.
2. Check ignition timing (→ Page 149).
3. Check valve drive (exhaust valves do not close).

56 | Troubleshooting | MS150033/05E 2013-10

TIM-ID: 0000017543 - 001

Summary of Contents for MS150033/05E






























































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands