7.
Observe the following general information:
• The sensors are identical with regard to
their design and electrical functions. In-
stallation is identical.
• Arrangement and position of sensors
8.
Screw in union (2) by hand.
9.
Tighten union (2) to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Union
M14 x 1.5 Tightening torque
40 Nm ±5 Nm
10.
Insert sensor in union (2).
11.
Tighten union nut (1) to specified torque using a torque wrench.
Name
Size
Type
Lubricant
Value/Standard
Union nut
M10
Tightening torque
35 Nm ±5 Nm
12.
Position V-band clamp (1).
Note:
Use new O-ring (2).
13.
Coat O-ring (2) with assembly compound
(Kluthe Hakuform 30–15).
14.
Insert O-ring (2) in groove of intake hous-
ing (3) and insert intake housing in compres-
sor housing of exhaust turbocharger.
15.
Align intake housing (3) to the vertical.
MS150116/04E 2018-04
| Exhaust Turbocharger | 203
TIM-ID: 0000081654 - 001
