Installing the transport locking
device on driving end (KS), ver-
sion A
1.
Screw holder (4) with spacer sleeves (5)
and screws (6) onto crankshaft. Spacer
sleeves (5) are optional.
2.
Tighten screws (6) with torque wrench to specified tightening torque.
Name
Size
Type
Lubricant
Value/Standard
Screw
M16
Tightening torque
(Engine oil)
160 Nm +16 Nm
3.
Screw nut (3) with washer (2) onto holder (4).
4.
Fit carrier (1) with washer (7) and nut (8) and tighten to the specified tightening torque using the torque
wrench.
Name
Size
Type
Lubricant
Value/Standard
Nut
M24
Tightening torque
(Engine oil)
100 Nm +10 Nm
5.
Lock with nut (3).
6.
Mark the engine as "Fitted with transportation locking device".
Removing the transport locking
device from driving end (KS),
version B
1.
Release locknuts (3) on both sides of the
flywheel housing, remove screws (4) and
take off the two holders (1).
2.
Remove screws (6) with washers (5), la-
bel (7) and plates (2).
3.
Store the removed parts carefully for possi-
ble reuse.
10 | Safety | MS150096/03E 2015-04
TIM-ID: 0000027593 - 005
