manualshive.com logo in svg

MTU 12V2000M86106, Operating Instructions Manual

Share
Download
MTU 12V2000M86106 Operating Instructions Manual Download Page 2

Engine model

kW/cyl.

Application group

12V2000M86

106 kW/cyl.

1D, continuous operation, variable, medium utiliza-
tion

12V2000M96

112 kW/cyl.

1DS, continuous operation, variable, low utilization

12V2000M96L

119 kW/cyl.

1DS, continuous operation, variable, low utilization

16V2000M86

102 kW/cyl.

1D, continuous operation, variable, medium utiliza-
tion

16V2000M96

112 kW/cyl.

1DS, continuous operation, variable, low utilization

16V2000M96L

121 kW/cyl.

1DS, continuous operation, variable, low utilization

Table 1: Applicability

© 2016 Copyright MTU Friedrichshafen GmbH

This publication is protected by copyright and may not be used in any way, whether in whole or in part, without the prior writ-
ten consent of MTU Friedrichshafen GmbH. This particularly applies to its reproduction, distribution, editing, translation, micro-
filming and storage or processing in electronic systems including databases and online services.

All information in this publication was the latest information available at the time of going to print. MTU Friedrichshafen GmbH
reserves the right to change, delete or supplement the information provided as and when required.

Summary of Contents for 12V2000M86106











































































































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands