7.3.3 Cylinder head cover – Removal and installation
Preconditions
☑ Engine is stopped and starting disabled.
Special tools, Material, Spare parts
Designation / Use
Part No.
Qty.
Grease (Kluthe Hakuform 30-10/emulsifier)
X00058061
O-ring
(→ Spare Parts Catalog)
Removing cylinder head cover
1.
Clean very dirty cylinder head covers (1)
prior to removal.
2.
Unscrew screws (3,4) and take off with
washers (2,5).
3.
Remove cylinder head cover (1) with O-
ring (6) from cylinder head (7).
Installing cylinder head cover
1.
Clean mounting surface.
2.
Check O-ring (6) for damage, replace if necessary.
3.
Coat O-ring (6) with grease.
4.
Place cylinder head cover (1) with O-ring (6) onto cylinder head (7).
5.
Install cylinder head cover (1) with screws (3,4) and washers (2,5).
118 | Task Description | MS150096/01E 2012-08
TIM-ID: 0000026826 - 002
