55
MTS_OW100_IFU-orthogold100-US-K182682_A
5 Emergency Procedures
If a hazardous incident occurs, switch off the OW100
®
and pull the power connector.
Protect the device from restarting and call authorized service personnel to repair
6 Cleaning Instructions
The OW100
®
should be cleaned and disinfected on a regular basis. Use a customary
inorganic and non-flammable disinfectant (for example, KleenAseptic
®
) and follow the
respective instructions. Use a cloth or a sponge. Do not spray the disinfectant directly
onto the device. Wipe with circling motions over the surface of the OW100
®
.
Clean the applicator
The applicator must be cleaned and disinfected after removal of the probe cover. For gel
removal and disinfecting use a customary, inorganic and non- flammable disinfectant.
Wipe with circling motions over all surfaces of the applicator. Pay special attention to the
water membrane.
6.1
Maintenance
Maintenance and safety service personnel. Inspections are to be accomplished yearly by
authorized
WARNING
Electric Shock Hazard!
Never remove the covers of the electronics cabinet. The high
voltage power supply circuits utilized by extracorporeal
acoustic wave devices use voltages that are capable of
causing serious injury or death from electric shock.
WARNING
Non-Authorized Maintenance Work!
Only persons who have successfully passed the service training
are allowed to perform maintenance work on the device
according the Service Manual and additional information
obtained during the training period.
Any other intervention will be considered as non-authorized with
all the consequences resulting from this fact.
