A-2
MS-9185 Server Board
Features Overview
The Adaptec Serial ATA II RAID controller supports:
RAID levels 0, and 1 using Adaptec
’
s HostRAID technology..
Supports
PCI Local Bus Specification
, Revision 2.2.
64-bit, 66-133 MHz PCI-X interface compatible with 64-bit PCI slots.
RAID creation using Adaptec RAID Configuration (ARC).
Easy array configuration and status using Adaptec Storage Manager..
Flash ROM for easy updates of controller BIOS.
Hot swap rebuild of fault tolerant arrays through the operating system.
Event logging and broadcasting, including messaging for alphanumeric pagers.
Global hotspare protecting every array that the drive has enough available
capacity to protect.
Operating System Compatibility
The following operating systems are supported:
Microsoft
®
W indows
®
–
W indows 2000
—
Advanced Server
–
W indows 2003 Server
—
Enterprise
–
W indows XP Professional
Red Hat Linux
–
Advanced Server 2.1 x86, 32-bit
–
Enterprise Server 3.0 x86, 32-bit, and QU4 x86-AMD 64 bit
–
Enterprise Server 3.0, Athlon processor
SuSE Linux
–
Professional 9.1 x86, 32-bit and 64-bit
–
Enterprise Server 9.0 x86, 32-bit and 64-bit
–
United Linux 1.0, 32-bit
Novell NetW are 6.5
Hardware Requirements
The following list summarizes the hardware requirements:
Intel Pentium, or equivalent, processor
A motherboard that meets the following compatibility requirements:
–
Complies with the
PCI Local Bus Specification,
Revision 2.2 and higher.
–
Supports multifunction devices where one of the devices is a PCI bridge.
–
Provides large memory-mapped address ranges.
At least 128 MB of RAM
An available 32- or 64-bit PCI or PCI-X slot
20 MB of free drive space
16-bit SVGA color monitor with a resolution of at least 800 x 600
CD drive (that is
not
part of the RAID you are installing)
Introduction
Summary of Contents for K9SD Master
Page 1: ...i K9SD Master MS 9185 V1 X Server Board G52 S9185X1...
Page 5: ...v WEEE Waste Electrical and Electronic Equipment Statement...
Page 6: ...vi...
Page 7: ...vii...
