3-14
MS-9185 Server Board
B
Keyboard Auto-Repeat Delay
This setting sets the delay between when the key was first pressed and
when the acceleration begins.
PS/2 Mouse
If your system has a PS/2 mouse port and you install a serial pointing device,
select [Disabled].
Serial Port A/B
These settings enable/disable the onboard Serial Port A / B.
Base I/O Address
These settings specify the base I/O port addresses of the onboard Serial Port A
/ B.
Floppy Disk Controller
This setting enables/disables the onboard floppy disk controller.
Base I/O Address
This setting specifies the base I/O port address of the onboard FDD.
Summary of Contents for K9SD Master
Page 1: ...i K9SD Master MS 9185 V1 X Server Board G52 S9185X1...
Page 5: ...v WEEE Waste Electrical and Electronic Equipment Statement...
Page 6: ...vi...
Page 7: ...vii...
