A-17
Adaptec SATAII RAID
Adaptec RAID Configuration Utility
The Adaptec RAID Configuration (ARC) utility is an embedded BIOS utility that includes:
Array Configuration Utility (ACU)
—
Used to create, configure, and manage
arrays .
SATA
A
Select
Utility
—
Enables changing Serial ATA (SATA) device and control-
ler settings.
–
Controller Configuration
—
Enables you to modify controller BIOS boot
and display options.
–
SATA Configuration
—
Enables you to modify the SATA channel interface
definitions and SATA device configuration options.
Disk Utilities
—
Used to format or verify disks.
To run ARC, press
Ctrl+A
when prompted by the following message during the
system startup:
Press <Ctrl><A> for Adaptec RAID Configuration Utility
If your computer contains two or more controllers, a list of controllers is displayed.
Use the arrow keys to select the controller you want to configure, then press
Enter
.
The ARC menu appears, presenting these options:
Array Configuration Utility (ACU)
SATA
A
Select
Utility
Disk utilities
To select an option from this menu, or from any of the menus within ARC, browse
with the arrow keys, then press
Enter
. In some cases, selecting an option displays
another menu. To return to the previous menu at any time, press
Esc
.
Summary of Contents for K9SD Master
Page 1: ...i K9SD Master MS 9185 V1 X Server Board G52 S9185X1...
Page 5: ...v WEEE Waste Electrical and Electronic Equipment Statement...
Page 6: ...vi...
Page 7: ...vii...
