MSH equipment CA Eco 40, User Manual

Page: 9 / 34

9 Eco 40-55-75 manual revision 01/10
WARNING!
THE SAFETY WARNING NAMEPLATES SHALL NOT BE REMOVED, COVERED OR
DAMAGED.
Figure 3.9 B - Nameplates position
4 INSTALLATION
4.1 TRANSPORT AND HANDLING
Have unit transported by qualified and trained Personnel. The Exhauster shall be handled in a suitable way
so as to avoid damages. All protections, electric circuits, control equipment, shall be suitably closed and
fastened.
The Exhauster is packed on pallet, wrapped in plastic and covered with cardboard . Packed machine
dimensions and weight are indicated on the package. Check for transport damages together with the
carrier.
N.B.: The Manufacturer will not be liable for damages due to improper lifting and handling of the
packed unit.
4.2 STORAGE
For any long period of inactivity, store the Exhauster in a suitable place, considering storage environment
and time. In particular, consider allowed temperature range, humidity and pollution.
•
Store the Exhauster indoors;
•
Protect the Exhauster from any shock and stress;
•
Protect the Exhauster from humidity and extremely wide temperature 0° C + 60 °C;
•
Avoid contact with corrosive substances.
4.3 ARRANGEMENTS BEFORE INSTALLATION
Before installation, it is necessary to prepare a suitable operating area, limiting any interference with other
activities as much as possible.
WARRANTY does not cover any damage to the Exhauster due to transport and han-
dling.
Any repair or replacement of damaged parts is at the Customer's charge.
Nameplate “A”
Nameplate “B”
Nameplate “C”
Nameplate “D”
Nameplate “E”
Nameplate “F”
Nameplate “G”