MSH equipment CA Eco 40, User Manual

Page: 6 / 34

Eco 40-55-75 manual revision 01/10 6
2.9 SPECIFICATIONS
This section indicates Machine technical features and specifications user shall refer to in case of contact
with the Manufacturer After-sales Service.
TABLE 2.9A - Technical Features and Specifications
2.10 OUTFIT
The following equipment refers to the standard production Exhausters. Any special machine could hence
require parts different than the listed ones.
2.10.1 STANDARD
The Exhauster comes with:
•
User's Manual
•
Declaration of conformity
•
Installation equipment
2. 10.2 OPTION EQUIPMENT ON REQUEST
No options are set with respect to the standard outfit.
Any change and/or addition of any accessory whatsoever must be explicitly approved and made by the
Manufacturer.
2. 11 ELECTROMAGNETIC ENVIRONMENT
The Exhauster is designed to operate correctly within an electromagnetic or industrial environment. Design
conforms to the principles of the product Harmonised Technical Standards:
HARMONISED EUROPEAN STANDARD
EN 60439-1(third edition)
February (1995) ref. CENELEC EN 60439-1:1994-01
HARMONISED EUROPEAN STANDARD
EN 60439-1/Al/Ali September (1997) ref. CENELEC EN 60439-1/Al:1995-12+ EN 60439-1/All:1996-02
In particular, manufacturer used proven components and principles, as required by 7.10 of EN 60439-1/
Al:1995-12+ EN 60439-1/Al1:1996-02
Built-in electronic equipment was installed as indicated in the instructions that come with the equipment
itself and considering the general criteria for
EMC specified in EN 60204-1 art. 4.
HARMONISED EUROPEAN STANDARD EN 60439-1(third edition)
February (1995) ref. CENELEC EN 60439-1:1994-01
HARMONISED EUROPEAN STANDARD EN 60439-1/Al/Ali
September (1997) ref. CENELEC EN 60439-1/Al:1995-12+ EN 60439-1/All:1996-02
In particular, manufacturer used proven components and principles, as required by 7.10 of EN 60439-1/
Al:1995-12+ EN 60439-1/Al1:1996-02
Built-in electronic equipment was installed as indicated in the instructions that come with the equipment
itself and considering the general criteria for
EMC specified in EN 60204-1 art. 4.
Description Features
Power supply 400V-415V-50Hz
Installed power Eco 40 - 4 kW
Eco 55 - 5.5 kW
Eco 75 - 7.5 kW
Compressed air supply Max 10 Bar
Relative humidity Max 90% w/out condensate
Weight (kg) 235 - 250 - 255
Dimensions 1280x615x h1380 mm
Nominal power input Eco 40 - 9.5 A
Eco 55 - 13.3 A
Eco 75 - 16.7 A