MSH equipment CA Eco 40, User Manual

Page: 14 / 34

Eco 40-55-75 manual revision 01/10 14
5 OPERATION
5.1 PERSONNEL
The Exhauster is designed for use by many Operators.
Personnel allowed to work on the Exhauster shall have the following knowledge (or acquire it after suitable
training) and be familiar with the contents of this Manual as well as all Safety-related concerns:
•
General and technical knowledge of suitable level to understand Manual contents;
•
Knowledge of the main health and safety and accident prevention rules;
•
Knowledge of how to behave in an emergency situation, where to find personal protection gear and
how to use it correctly.
Maintainers, apart from the above, shall also have suitable electrical, pneumatic and mechanical Technical
knowledge.
5.2 CONTROL PANEL
Exhauster controls are on the control panel, at
Machine front.
Figure 5.2 a - controls on front panel
KEY:
1. Panel
main switch;
2. Hour counters;
3. Filter cleaning warning light;
4. Power on warning light;
5. Overload cut-out alarm warning light;
6. Manual filter cleaning button.
5.3 COMMISSIONING AND USE
To power on the Exhauster proceed as follows:
1.
set Main Switch to ON to set the machine
ready to start;
2. open compressed air supply cock;
3. when one of the suction mouthpieces opens,
so that the remote contact closes, the machine
starts and performs set function, as pre-
programmed at the Factory with default
settings, that are usually suitable for normal
use.
1
2
3
4
5
6