MSH equipment CA Eco 40, User Manual

Page: 7 / 34

7 Eco 40-55-75 manual revision 01/10
3 SAFETY RULES
3.1 GENERAL WARNINGS
The Operator shall carefully read the information given in this Manual, especially the Safety rules and pre-
cautions specified in this section.
Moreover, it is fundamental that the Operator follows these warnings:
•
keep the Exhauster and the work area clean and in order;
•
use the Exhauster in normal psychophysical conditions;
•
wear appropriate clothes and personal protection gear suitable for products in use;
•
do not remove or tamper with the Manufacturer nameplates on Exhauster;
•
do not remove or make inoperative any of the Exhauster Safety systems.
•
Do not use this unit in rooms subjected to risk of explosion.
3.2 INTENDED USE
The Exhauster is designed for removing non-explosive dust in general or similar material.
3.3 UNSUITABLE USE
Do not use the Exhauster:
•
for different purposes than those indicated in 3.2;
•
to take in substances that could result in a flammable and/or explosive environment;
•
in environments featuring explosive, aggressive atmosphere or with high dust or oily content;
•
in environments with a serious fire hazard;
•
outdoors, exposed to any weather condition;
•
to take in red-hot parts and/or parts on fire;
•
in a different way than stated in safety installation rules given herein.
3.4 DANGEROUS AREAS
Although the Exhauster does not involve any particular danger for exposed persons, it shall be used taking
some precautions, considering that:
•
the operator can come into contact with dangerous chemical products by accident and without being
aware of the resulting danger.
•
Before use, the person in charge of production shall evaluate unit use conditions according to the
danger possibly caused by products and take suitable protections such as: work in a room featuring
a guaranteed minimum ventilation or change of air.
•
Pay utmost attention when removing the dust bag. Carefully follow the filter removal proce-
dure described in the manual and shown in the figures on the package.
•
Exhaust tube and silencer could reach a very high temperature (>55°C) so it is important that users
wear any necessary safety gear before starting any operation.
3.5 SAFETY DEVICES
The Exhauster comes complete with suitable guards to protect the persons exposed to risks due to moving
organs, risks connected to power supply, and so on.
The unit fits the following safety devices:
•
metal barrier all around the mobile parts. Basically, the enclosures are a barrier for any potentially
dangerous parts.
•
The emergency stop is performed via the control panel main switch.
•
Rotating pushbutton cuts off machine supplies to perform maintenance under safety conditions.
•
Safety release on the levers for removing the dust collector cylinder metal body.
The User is requested to install the following safety devices:
•
Electrical equipment with TT system: automatic circuit breaker with differential protection against
direct and indirect contacts on machine power control panel (if activated, it causes uncontrolled stop
of all actuators and power cut-off);
•
Electrical equipment with TN or IT system : refer to control panel specifications to install the suit-
able protections.