EVOLUTION 6000 Thermal Imaging Camera
34
Camera Setup
MSA
US
4
Camera Setup
4.1
On-Screen Camera Setup (EVOLUTION 6000+ TIC and 6000X TIC Only)
Several commonly modified options can be accessed directly via a simple on-screen menu on the
EVOLUTION 6000+ and EVOLUTION 6000X TIC. These options are accessible via the camera
menu. Also, many advanced options are available with the MSA Fire Service utility package.
The Fire Service utility package is required to access the options on the EVOLUTION 6000 TIC
(which does not have an on-screen menu). Refer to the operating instructions that come with the
Fire Service utility package for information on available options and how to use the package. The
Fire Service utility package is available as a free download from www.MSASafety.com and with
the product CD included with the camera.
The on-screen configuration menu provides a means to change the following:
-
Digital temperature target (°F or °C) (Spotmeter)
-
Compass configuration and calibration (EVOLUTION 6000+ TIC and EVOLUTION 6000X TIC)
-
Display brightness
-
Range finder units (fee or meters) if optional range finder is installed
-
Video Transmitter ON /OFF and channel selection if optional video transmitter is installed
-
Video Record ON / OFF (EVOLUTION 6000X TIC only).
4.2
Accessing On-screen Configuration Menu
(1)
Turn the camera ON and ensure it is in the NFPA Basic mode.
(2)
Turn the camera upside down.
(3)
Simultaneously push and hold the ZOOM and PALETTE buttons for three seconds until the
On-screen Setup menu appears.
(4)
Release the ZOOM and PALETTE buttons.
(5)
Return camera to the upright position.
The Config menu displays.
Fig. 13
Configuration menu (EVOLUTION 6000+ TIC and 6000X TIC only)