LambdaDriver 400 & 800
ML46430, Rev. 07
October 2004
Syntax
add-trap [arg #0] [arg #1]
where,
[arg #0] = <IP address>.
[arg #1] = <Community string>.
Default
–
Example
SYS_console>add-trap 198.33.45.222 Zorro
Entry 198.33.45.222 - Zorro added
SNMP TRAP TABLE
===============
IPADDR COMMUNITY
---------------------------------------------------
198.033.045.222 ----------- Zorro
---------------------------------------------------
Notes
–
Command
del-trap
Description Delete a destination station from the trap list.
Syntax
del-trap [arg #0]
where,
[arg #0] = <IP address>.
Default
–
Example
SYS_console>del-trap 198.33.45.222
Entry 198.33.45.222 deleted
Notes
–
slot
Command
get-wdm-card-stat
Description Show status of cards in device.
Syntax
get-wdm-card-stat opt.[arg #0]
where,
opt.[arg #0] = <slot>-<slot>-<slot>
and/or
<slot>..<slot>
i.e., individual slot numbers (separated by
hyphens), or range of slots.
Default
opt.[arg #0] =
all slots
Example
SYS_console>get-wdm-card-stat 2-8
SLT CARD_TYPE LAMBDA RATE ACC_OPT_RX WDM_OPT_RX WDM_LSR AMB_TMP
==================================================================
2 TM-SFP-C 1530 GigaEth OFF OFF Disable Normal
8 EM2009-CH 1470 Bypass OFF OFF OK Normal
Notes
–
Command
get-redun-card-stat
Description Show status of 1+1 redundancy modules.
Syntax
get-redun-card-stat opt.[arg #0]
where,
opt.[arg #0] = <slot>-<slot>-<slot>
and/or
<slot>..<slot>
i.e., individual slot numbers (separated by
hyphens), or range of slots.
156
