Moxa Technologies AirWorks AWK-3121 User Manual Download Page 85 | Manualshive

Page: 85 / 90

background image

AirWorks AWK-3121 User’s Manual

References

6-4

STP and RSTP

The STP/RSTP Concept

Spanning Tree Protocol

(STP) was designed to help reduce link failures in a network, and

provide protection from loops. Networks that have a complicated architecture are prone to
broadcast storms caused by unintended loops in the network. The STP protocol is part of the
IEEE802.1D standard, 1998 Edition bridge specification.

Rapid Spanning Tree Protocol

(RSTP) implements the Spanning Tree Algorithm and Protocol

defined by IEEE802.1w-2001 standard. RSTP provides the following benefits:

y

The topology of a bridged network will be determined much more quickly compared to STP.

y

RSTP is backward compatible with STP, making it relatively easy to deploy. For example:

Defaults to sending 802.1D-style BPDUs if packets with this format are received.

STP (802.1D) and RSTP (802.1w) can operate on the LAN ports and WLAN ports (AP
and WDS1-WDS8) of the same AWK-3121.

This feature is particularly helpful when the AWK-3121 connects to older equipment, such as
legacy switches.

Differences between RSTP and STP

RSTP is similar to STP, but includes additional information in the BPDUs that allow each bridge
to confirm that it has taken action to prevent loops from forming when it decides to enable a link
to a neighboring bridge. Adjacent bridges connected via point-to-point links will be able to enable
a link without waiting to ensure that all other bridges in the network have had time to react to the
change. The main benefit of RSTP is that the configuration decision is made locally rather than
network-wide, allowing RSTP to carry out automatic configuration and restore a link faster than
STP.

«
...
83
84
85
86
87
...
»

Summary of Contents for AirWorks AWK-3121



























































































Reviews:

No comments

Related manuals for AirWorks AWK-3121

Brand: XDS Pages: 99

Vb-C60 - Ptz Network Camera

Brand: Canon Pages: 30

Brand: Patton electronics Pages: 2

Brand: Patton electronics Pages: 86

Brand: Salto Pages: 2

Brand: Falcon Pages: 24

eBOX532-100-FL Series

Brand: AXIOMTEK Pages: 2

Brand: ZyXEL Communications Pages: 299

Brand: UfiSpace Pages: 34

Brand: MEDIATEK Pages: 166

Brand: Comelit Pages: 19

Brand: Aaeon Pages: 72

Brand: FOR-A Pages: 2

Industrial Network Track OSI

Brand: GarrettCom Pages: 10

2410SA - Serial ATA RAID Controller

Brand: Adaptec Pages: 14

Brand: Renesas Pages: 4

Brand: Paradyne Pages: 74

Brand: S&P Pages: 3

Brands by name

0 1 2 3 4 5 6 7 8 9 A B C D E F G H I J K L M N O P Q R S T U V W X Y Z

Popular brands

Load more brands