Moxa Technologies AirWorks AWK-3121 User Manual Download Page 41

Page: 41 / 90

AirWorks AWK-3121 User’s Manual

Web Console Configuration

3-25

WLAN Certification Settings

(for EAP-TLS in Client mode only)

When EAP-TLS is used, a WLAN Certificate will be required at the client end to support
WPA/WPA2-Enterprise. The AWK-3121 can support the

PKCS #12

, also known as

Personal

Information Exchange Syntax Standard

, certificate formats that define file formats commonly used

to store private keys with accompanying public key certificates, protected with a password-based
symmetric key.

Current Status

displays information for the current WLAN certificate, which has been imported

into the AWK-3121. Nothing will be shown if no certificate is available.

Certificate issued to

: shows the certificate user

Certificate issued by

: shows the certificate issuer

Certificate expiration date

: indicates when the certificate has expired

You can import a new WLAN certificate in

Import WLAN Certificate

by following these steps in

order:

Input the corresponding password (or key) in the

Certificate private password

field. Then

click

Submit

to set the password.

You can see the password displayed in the Certificate private password field. Then click on
the

Browse

button in

Select certificate/key file

and select the certificate file.

Click

Upload Certificate File

to import the certificate file. If it succeeds, you can see the

information uploaded in

Current Certificate

. If it fails, you may need to return to step 1 to set

the password correctly and then import the certificate file again.

NOTE

The WLAN certificate will remain after the AWK-3121 reboots. Even though it is expired, it can
still be seen on

Current Certificate

Summary of Contents for AirWorks AWK-3121


























































































Search results

Summary of Contents for AirWorks AWK-3121

Reviews:

Related manuals for AirWorks AWK-3121

Brands by name

Popular brands

Moxa Technologies AirWorks AWK-3121, User Manual

Search results

Summary of Contents for AirWorks AWK-3121

Reviews:

Related manuals for AirWorks AWK-3121

Brands by name

Popular brands