9 Devices
86
Rev. 02/2018
Self Test
Operational safety!
If you carry out a self test, it is essential for the gas supply to be switched
off and no more residual gas is left in the combustion chamber. Non-comp-
liance can result in damage to equipment or injury to persons.
You can run a self test to check the order of the wiring and the connection between the MIC
ignition controller outputs down to the spark plugs.
The status display indicates whether the ignition controller is ready for the self test.
–
Red: The ignition controller is in a state in which no self test can be done. For example, there
is an error or a configuration is currently being downloaded into the device.
–
Yellow: The self test is running.
–
Green: The ignition controller is ready and the self test can be started.
Summary of Contents for PoewerView3
