Motortech PoewerView3, Operating Manual

Page: 32 / 138

32 Rev. 02/2018
6.1 Unpacking
Unpack the equipment, taking care not to damage it, and ensure that the operating manual is
always stored with the equipment and is easily accessible. Check the contents for completeness
and verify that the equipment meets your application requirements.
Scope of Supply
The scope of supply of the PowerView3 includes:
– PowerView3
– Cable for power supply (15 m / 49.2")
– Connector for power supply via an MIC ignition controller
– CAN cable (15 m / 49.2")
– Terminating resistor 120

– 6 wire end ferrules
– 4 attachment clamps
– 4 attachment screws M3
– SDHC-card (8 GB)
– Storage device (USB flash drive or CD-ROM) with MOTORTECH Trend Viewer software for
visualizing PowerView3 recordings
– Operating manual
6 Installation Instructions