Motortech PoewerView3, Operating Manual

Page: 7 / 138

1 General Information
Rev. 02/2018 7
Danger
This symbol indicates warnings for danger to life, especially due to high
voltage. Read these warning notices carefully and take the mentioned
precautionary measures.
1.4 Which Abbreviations/Acronyms Are Used in the Operating Manual?
In the manual or the user interface, the following abbreviations / acronyms are used.
Abb. Term Description Explanation
ADC Analog-to-Digital
Converter Component that converts
analog input signals into digital
signals.
ATDC After Top Dead Center
BTDC Before Top Dead
Center
CAN bus Controller Area
Network bus Bus for control
devices / networks Asynchronous serial
connection system for linking
control units
CE Conformité
Européenne Conformity with EU
directives Mark based on EU legislation
for certain products in
conjunction with product safety
CR Contrast Ratio
°crank-
shaft Degree crankshaft Unit for the rotation angle of
the crankshaft
CSA Canadian Standards
Association
Organization that defines
standards, inspects products
for safety compliance, and
issues pertinent certifications.
DC Direct Current
DetCon Detonation Control
System
Serves to prevent major engine
damage that can be caused by
knocking combustion.
EEPROM Electrically Erasable
Programmable
Read-Only Memory Non-volatile electronic memory
module whose stored
information can be deleted
electrically.