Motortech PoewerView3, Operating Manual

Page: 67 / 138

8 General Operation
Rev. 02/2018 67
Enabling Access Control
Enable the access control for all access levels as follows:
1. Tap the Enable Control button.
▸ You are prompted to enter the PIN for the access level Master .
2. Enter the PIN for the access level Master and tap Enter .
▸ Access control for all access levels is enabled.
▸ You are logged in as Master .
▸ The Logout button is activated.
▸ The Disable Control button is activated.
If necessary, you can log on for a different access level. Refer to the section Logging in and
Logging out on page 68.
Disabling Access Control
Disabling access control
If the access control is not to be used for a longer period of time, we
recommend that you write down the Master PIN or reset all PINs to

before disabling the access control. A renewed enabling of the access
control is only permitted with the Master PIN. If you have forgotten the
Master PIN, you must contact MOTORTECH for a reset of all PINs (see
Resetting the PINs on page 70).
Disable the access control for all access levels as follows:
1. Tap the Disable Control button.
▸ You are prompted to enter the PIN for the access level Master .
2. Enter PIN for the access level Master and tap Enter .
▸ The Disabling Access Control dialog window appears.
3. Observe the note in the Disabling Access Control dialog window. If you are certain that you
want to the disable access control, answer the displayed question by tapping Yes .
▸ Access control for all access levels is disabled.
▸ If you have set a minimum level, it will be deleted.
▸ In the menu bar the condition Disabled is displayed.
▸ The buttons Login and Logout are deactivated.
▸ The Enable Control button is activated.