Motorola Symbol TC70, User Manual

Page: 23 / 166

Figure 10: Insert Bottom of Battery into Battery Compartment
2 Rotate the top of the battery into the battery compartment.
3 Press the battery down into the battery compartment until the battery release latches snap into place.
Figure 11: Press Down on Battery
Charging the Battery
Before using the TC70 for the first time, charge the main battery until the green Charging/Notification light emitting
diode (LED) remains lit. To charge the TC70, use a cable or a cradle with the appropriate power supply. For
information about the accessories available for the TC70, see
Accessories on page 117 for more information.
• Snap-On USB Cable
• Charging Cable Cup
• 2-Slot Charge Only Cradle
• 2-Slot USB/Ethernet Cradle
• 5-Slot Charge Only Cradle
• 5-Slot Ethernet Cradle
The 4,620 mAh battery fully charges in approximately six hours at room temperature.
Charge batteries in temperatures from 0 °C to 40 °C (32 °F to 104 °F). The TC70 or accessory always performs
battery charging in a safe and intelligent manner. At higher temperatures (e.g. approxi37 °C (+98 °F)) the
TC70 or accessory may for small periods of time alternately enable and disable battery charging to keep the battery at
acceptable temperatures. The TC70 or accessory indicates when charging is disabled due to abnormal temperatures
via its LED.
Procedure:
1 To charge the main battery, connect the charging accessory to the appropriate power source.
2 Insert the TC70 into a cradle or attach to a cable. The TC70 turns on and begins charging. The Charging/
Notification LED blinks amber while charging, then turns solid green when fully charged.
Getting Started | 23