Motorola RD5000, Integrator Manual

Page: 88 / 228

5 - 18 RD5000 RFID Integrator Guide
Key Entry Page
If either
40-Bit WEP
or
128-Bit WEP
is selected the wizard proceeds to the key entry dialog box unless the
Use
Passkey
check box was selected in the
Encryption
dialog box (see Figure 5-20 on page 5-16 ). The
Key Entry
dialog
box will be shown only if the authentication is set to
None
. To enter the key information:
1.
Enter the 40-bit or 128-bit keys into the fields.
2.
Click
Next
.
Figure 5-21
40-Bit and 128-Bit WEP Keys Dialog Boxes
Passkey Dialog
When
None
is selected as an authentication and
WEP
as an encryption, choose to enter a passkey by checking the
Use PassKey
check box. The user is prompted to enter the passkey. For WEP, the
Use PassKey
checkbox is only
available if the authentication is
None
.
When
None
is selected as an authentication and
TKIP
as an encryption, passkey entry is required. The user cannot
enter a passkey if the encryption is
TKIP
and the authentication is anything other than
None
.
When
None
is selected as an authentication and
AES
as an encryption, passkey entry is required. The user cannot
enter a passkey if the encryption is
AES
and the authentication is anything other than
None
.
Figure 5-22
Passkey Dialog Box
Click
Next
. The
IP Address Entry
dialog box displays.
40-Bit WEP Keys Dialog Box 128-Bit WEP Keys Dialog Box