Motorola RD5000, Integrator Manual

Page: 173 / 228

RFID Applications 7 - 35
Mode Menu
Click the Mode menu to use the Inventory method to read tags, locate a tag, program a tag, scan a bar code, or
write a tag. Mode menu options offer all of the operations available by clicking an icon on the main Tags window
menu bar.
Inventory
Click Mode - Inventory to start reading tags using the Inventory method. Using this method, the application
performs as if the trigger is pulled. Tag read attempts continue until the Inventory menu option is clicked again.
Locate Tag
This option is used to find a specific tag.
1.
Click in the main Tags window or click Mode - Locate Tag .
Figure 7-31
RFID - Locate Tag Window
2.
Enter a valid Tag ID in the text box below the magnifying glass:
•
An 8-byte hex string for 64 bits
•
A 12-byte hex string for 96 bits.
3.
Pull the trigger to locate the tag. The mobile computer beeps when the tag is found. The faster the beep, the
closer the mobile computer is to the located tag.
Figure 7-31 shows tag ID 80 00 80 04 23 23 84 33 was read 83 times.
4.
Click Back to Global Scroll to return to the main Tags window.
64 bits
or
96 bits
Tag ID
(Hex
string)
NOTE To pre-fill the text box with a valid Tag ID, select a tag in the main Tags window and click .