Motorola RD5000, Integrator Manual

Page: 52 / 228

3 - 6 RD5000 RFID Integrator Guide
Setup
Figure 3-4
UBC Adapter Power Connection
Battery Charging Indicators
To charge a spare battery using the UBC adapter, connect the power supply to the UBC (see Figure 3-4 on page
3-6 ), then insert the spare battery. The spare battery begins charging automatically. The charge LEDs (see Figure
3-5 )) show the battery charging. Table 3-2 shows battery charging status indications. The battery usually charges
in three hours.
Figure 3-5
UBC Adapter LEDs
CAUTION Use only a Motorola approved power supply output rated 15 VDC and minimum 1.5 A. Use of an
alternative power supply will void the product warranty and may cause product damage.
Power Supply
AC Line Cord
DC Cable
POWER
READY or STANDBY or FAULT
CHARGING
(Green) (Flashing Yellow) (Solid Yellow)
(Solid Yellow)