Motorola RD5000, Integrator Manual

Page: 48 / 228

3 - 2 RD5000 RFID Integrator Guide
Power Supply
The Motorola approved power supply output rated at12 Vdc and a minimum of 3.33 A is required to maintain
warranty coverage and regulatory approvals. The power supply is certified to EN60950-1 with SELV outputs. Use
of an alternative power supply will invalidate any approval given to this device and may be dangerous.
The power supply is self regulating and can accept inputs within the range of 100-250 VAC and 50-60 Hz. Power
cords are available to fit most local power delivery systems.
Battery
The Motorola approved battery is a removable, rechargeable 7.2 V Lithium Ion battery pack, rated at 2200 mAh, 15.8
watt hours.
The Motorola rechargeable battery packs are designed and constructed to the highest standards within the
industry. However, there are limitations to how long a battery can operate or be stored before needing replacement.
Many factors affect the actual life cycle of a battery pack, such as heat, cold, harsh environmental conditions and
severe drops.
When batteries are stored over six (6) months, some irreversible deterioration in overall battery quality may occur.
Store batteries discharged in a dry, cool place, removed from the equipment to prevent loss of capacity, rusting of
metallic parts and electrolyte leakage. When storing batteries for one year or longer, they should be charged and
discharged at least once a year. If an electrolyte leakage is observed, avoid any contact with affected area and
properly dispose of the battery. Batteries must be charged within the 32° to 104° F (0° to +40° C) ambient
temperature range. Replace the battery when a significant loss of run time is detected.
Standard warranty period for all Motorola batteries is 30 days, regardless if the battery was purchased separately
or included as part of the RFID reader. For more information on Motorola batteries, please visit:
http://mysymbolcare.symbol.com/battery/batbasics1.html