Motorola RD5000 Integrator Manual Download Page 159

Page: 159 / 228

RFID Applications 7 - 21

Read Tags

Click the

Start Reading

button, the unit starts to read tags. As the tags are read the values are displayed on the

RFID - Read Window

Figure 7-12

RFID - Read Window

Click the

Remove SR

button and the selected record is removed from the list. This command is not accepted when

read is going on. If command is given while read is in progress the following message appears in the

RFID - Read

Window

.or the record is removed, success is displayed in the

RFID - Read Window

Figure 7-13

RFID - Read Window

If no select record is found at the given index, then following error message is displayed in the

RFID - Read

Window.

The Index to remove select record is provided in the tag access page.

Figure 7-14

RFID - Read Window

See

Tag Logging on page 7-7

for information on logging the file tag values.

Summary of Contents for RD5000





































































































































































































































Search results

Summary of Contents for RD5000

Reviews:

Brands by name

Popular brands

Motorola RD5000, Integrator Manual

Search results

Summary of Contents for RD5000

Reviews:

Brands by name

Popular brands